GME-S750-Pro Mist Collector
GME-S750-Pro adalah mist collector seri GME-S-Pro dari Apiste yang dirancang untuk lingkungan industri dengan kebutuhan tinggi. Kapasitas aliran udara maksimum mencapai 12,6 m³/menit, efisiensi penangkapan kabut / mist sebesar 99,7%, dan berat hanya sekitar 26 kg. Dilengkapi sakupan sisi (side suction), motor permanent magnet synchronous berdaya 0,75 kW, dan desain yang tetap efisien di suhu sampai 50°C.
Cocok digunakan pada workstation las, mesin CNC, atau area produksi dengan kabut oli / aerosol ringan.
Spesifikasi GME-S750-Pro Mist Collector
| Maximum air volume(m³/min) | 12.6 |
|---|---|
| Maximum static pressure (kPa) | 1.1 |
| Collecting efficiency(%) *1 | 99.7 |
| Operating temperature and humidity | 0 to 50℃, 90% RH or less (indoor specification, no condensation) |
| Absorption gas temperature(℃) | 0 to 50 |
| Collection target *2 | Water-insoluble oil mist (ignition point: 150℃ or higher), water-soluble oil mist |
| Max. inlet density(mg/m3) | 50 |
| External dimensions(mm) *3 | H484×W408×D539 |
| Suction port(mm) | Side suction ø123 |
| Weight(kg) | Approx. 26 |
| Coating color | Munsell N7, Munsell 5PB2/2 |
| Rated voltage(V) *4 | Three-phase 200 to 230 V AC (50/60 Hz) |
| Current consumption(A) *5 | 4.1 |
| Power consumption(W) *5 | 850 |
| Recommended breaker capacity(A) | 10 |
| Installed motor | Permanent magnet synchronous motor (for inverter drive only) |
| Installed motor output | 0.75 kW 4P (fully enclosed fan-less type) |
| Fan material | A5052 (aluminum), SPCC (iron) |
| Disk material | SUS304 (stainless steel) |
| Drain pipe(mm) | Outside diameter ø25.4 pipe (2 places) |
| Noise(dB[A]) | 72 |
| Certification | CE / ETL |
